Last updated:
BT Mobile MMS Settings UK 2026 MMS
BT Mobile MMS settings control how your phone sends and receives picture messages. The MMSC address is http://mmsc.mms.o2.co.uk:8002 and MMS Proxy is 82.132.254.1 on port 8080. Most Android devices need these values entered manually; iPhones receive them via the carrier bundle automatically.
📋 On this page
As an MVNO on EE's network, BT Mobile shares the same MMS infrastructure as Plusnet and Asda Mobile — if MMS fails, check whether EE itself has a known issue before assuming a fault with the SIM.
BT Mobile MMS Settings — Full Guide
Enter these values exactly in your APN profile. Even a single incorrect character will stop picture messages from working.
| Field | Value | |
|---|---|---|
| APN | btmobile.bt.com | |
| MMSC | http://mmsc.mms.o2.co.uk:8002 | |
| MMS Proxy | 82.132.254.1 | |
| MMS Port | 8080 | |
| MCC | 234 | |
| MNC | 30 | |
| APN Type | default,supl,mms | |
| APN Protocol | IPv4/IPv6 |
⚠ MMS requires an active mobile data connection. Picture messages cannot be sent over Wi-Fi only — mobile data must be enabled.
Android MMS Setup — BT Mobile
On Android, MMS settings are entered in the APN (Access Point Names) section of your mobile network settings. The exact menu path varies by manufacturer.
Samsung (Galaxy devices)
- Open Settings › Connections › Mobile Networks › Access Point Names.
- Tap your existing BT Mobile APN to edit it, or tap + to create a new one.
- Set APN: btmobile.bt.com.
- Enter MMSC: http://mmsc.mms.o2.co.uk:8002.
- Enter MMS Proxy: 82.132.254.1 and MMS Port: 8080.
- Set APN Type: default,supl,mms.
- Tap ⋮ › Save, then select the profile by tapping the radio button next to it.
- Restart your phone or toggle Aeroplane Mode to apply the changes.
Pixel and other Android devices
- Open Settings › Network & internet › Mobile network › Access point names.
- Tap the + icon to add a new APN, or tap your existing BT Mobile APN to edit it.
- Enter all values from the table above exactly. Leave any unlisted fields blank.
- Tap the three-dot menu and select Save. Tap the radio button next to the APN to activate it.
- Restart your phone to apply MMS settings.
⚠ Important: After tapping Save on Android, the APN is not yet active. You must tap the radio button (empty circle) next to the APN to activate it. The circle must be filled for the profile to be in use.
BT Mobile MMS on iPhone
iPhones receive MMS settings automatically via the BT Mobile carrier bundle. You generally do not need to enter them manually. If picture messages are not working on iPhone, follow these steps:
- Go to Settings › General › About. If a carrier settings update is available, a prompt will appear — tap Update to install it.
- Go to Settings › Messages and confirm MMS Messaging is toggled ON.
- Toggle Aeroplane Mode on for 15–30 seconds, then off, to re-register on the BT Mobile network.
- Restart the iPhone fully and test sending a picture message.
- If MMS still does not work: Settings › General › Transfer or Reset iPhone › Reset › Reset Network Settings. Note this clears saved Wi-Fi passwords.
Note: On iPhones with iOS 16 or later, the APN field at Settings › Mobile Data › Mobile Data Network may be greyed out. This is normal — BT Mobile controls it via the carrier bundle. Contact BT Mobile to force a carrier profile update if needed.
Common BT Mobile MMS Problems
| Problem | Most Likely Cause | Fix |
|---|---|---|
| Picture messages stuck as "Sending" | Wrong MMS Proxy or Port | Verify MMS Proxy: 82.132.254.1 Port: 8080 |
| Can't send picture messages | Mobile data is off or MMSC is wrong | Enable mobile data; verify MMSC is exactly http://mmsc.mms.o2.co.uk:8002 |
| MMS works on Wi-Fi but not mobile data | Data connection issue or APN not activated | Select the APN profile using the radio button; restart phone |
| Receiving blank/broken MMS | APN Type missing mms value | Edit APN and set Type to default,supl,mms |
| iPhone not receiving group texts | MMS Messaging toggle is off | Settings › Messages › enable MMS Messaging |
Troubleshooting BT Mobile MMS
- Make sure mobile data is switched on — MMS needs an active data connection; Wi-Fi alone won't send or receive picture messages.
- Double-check the MMSC address matches http://mmsc.mms.o2.co.uk:8002 exactly, with no stray spaces.
- Verify MMS Proxy and Port: 82.132.254.1 / 8080 — an incorrect value here is a very common cause of stuck messages.
- Confirm the APN Type has mms alongside default and supl.
- Check the APN profile is genuinely activated on Android — the radio button must be filled, not just saved.
- Confirm MMS is on in the messaging app — Google Messages and Samsung Messages each have a toggle for this.
- For changes to fully take effect, restart the phone afterward.
- When nothing else helps, reset network settings and retype every value.
- Call BT Mobile on 0800 800 150 or 150 (free from BT Mobile) if the fault persists after all of the above.
Frequently Asked Questions — BT Mobile MMS
What is the BT Mobile MMSC address?
The BT Mobile MMSC address is http://mmsc.mms.o2.co.uk:8002.MMS Proxy: 82.132.254.1, Port: 8080. Enter these values exactly in your APN settings to enable picture messaging.
Why are BT Mobile picture messages not working?
The most common causes are: mobile data is disabled, the MMSC is entered incorrectly, or the APN Type does not include
mms. Verify the values from the table above exactly. Also confirm the APN profile is selected (filled radio button on Android).What APN type should I use for BT Mobile MMS?
Use APN Type: default,supl,mms. This combines internet data, SUPL (GPS), and MMS in a single APN entry. All three values are required for full functionality.
Does BT Mobile MMS work on 5G?
Yes. MMS works on all BT Mobile network connections — 2G, 3G, 4G and 5G — using the same MMSC settings. The connection type does not affect MMS sending or receiving.
Why is MMS greyed out on my iPhone with BT Mobile?
On iPhones, the MMS APN is controlled by the carrier bundle — you cannot edit it manually. Go to Settings › General › About to check for a carrier settings update. If MMS is still not working, contact BT Mobile support: 0800 800 150 or 150 (free from BT Mobile).
← Back to BT Mobile APN Settings