Last updated:

Lebara MMS Settings UK 2026 MMS

Lebara MMS Settings UK 2026 MMS guide thumbnail

Lebara MMS settings control how your phone sends and receives picture messages. The MMSC address is http://mmsc.mms.vodafone.co.uk:8002 and MMS Proxy is 212.183.137.012 on port 8799. Most Android devices need these values entered manually; iPhones receive them via the carrier bundle automatically.

As an MVNO on Vodafone's network, Lebara uses the same MMSC and proxy as Vodafone and its other MVNOs like VOXI and Talkmobile — only the APN name differs.

Lebara MMS Settings — Full Guide

These values need to go into the APN profile exactly as shown — small errors stop MMS.

FieldValue
APNuk.lebara.mobi
MMSChttp://mmsc.mms.vodafone.co.uk:8002
MMS Proxy212.183.137.012
MMS Port8799
MCC234
MNC15
Usernamelebara
Passwordlebara
APN Typedefault,supl,mms
APN ProtocolIPv4/IPv6
⚠ MMS requires an active mobile data connection. Picture messages cannot be sent over Wi-Fi only — mobile data must be enabled.

Android MMS Setup — Lebara

The APN (Access Point Names) section of mobile network settings is where MMS gets configured on Android, with the exact path varying by manufacturer.

Samsung (Galaxy devices)

  1. Open Settings › Connections › Mobile Networks › Access Point Names.
  2. Tap your existing Lebara APN to edit it, or tap + to create a new one.
  3. Set APN: uk.lebara.mobi.
  4. Enter MMSC: http://mmsc.mms.vodafone.co.uk:8002.
  5. Enter MMS Proxy: 212.183.137.012 and MMS Port: 8799.
  6. Set APN Type: default,supl,mms.
  7. Tap ⋮ › Save, then select the profile by tapping the radio button next to it.
  8. A restart or Aeroplane Mode toggle will apply the new settings.

Pixel and other Android devices

  1. Open Settings › Network & internet › Mobile network › Access point names.
  2. Tap the + icon to add a new APN, or tap your existing Lebara APN to edit it.
  3. Every value from the table above should be entered exactly, with unlisted fields left blank.
  4. Tap the three-dot menu and select Save. Tap the radio button next to the APN to activate it.
  5. Restart the phone for the MMS settings to take effect.
⚠ Important: After tapping Save on Android, the APN is not yet active. You must tap the radio button (empty circle) next to the APN to activate it. The circle must be filled for the profile to be in use.

Lebara MMS on iPhone

iPhones receive MMS settings automatically via the Lebara carrier bundle. You generally do not need to enter them manually. If picture messages are not working on iPhone, follow these steps:

  1. Settings › General › About will show a prompt if there's a carrier settings update to install.
  2. Go to Settings › Messages and confirm MMS Messaging is toggled ON.
  3. Toggle Aeroplane Mode on for 15–30 seconds, then off, to re-register on the Lebara network.
  4. Restart the iPhone completely and try sending a picture message.
  5. For persistent MMS failures: Settings › General › Transfer or Reset iPhone › Reset › Reset Network Settings, which clears saved Wi-Fi passwords.
Note: On iPhones with iOS 16 or later, the APN field at Settings › Mobile Data › Mobile Data Network may be greyed out. This is normal — Lebara controls it via the carrier bundle. Contact Lebara to force a carrier profile update if needed.

Common Lebara MMS Problems

ProblemMost Likely CauseFix
MMS works on Wi-Fi but not mobile dataData connection issue or APN not activatedSelect the APN profile using the radio button; restart phone
Receiving blank/broken MMSAPN Type missing mms valueEdit APN and set Type to default,supl,mms
iPhone not receiving group textsMMS Messaging toggle is offSettings › Messages › enable MMS Messaging
Can't send picture messagesMobile data is off or MMSC is wrongEnable mobile data; verify MMSC is exactly http://mmsc.mms.vodafone.co.uk:8002
Picture messages stuck as "Sending"Wrong MMS Proxy or PortVerify MMS Proxy: 212.183.137.012 Port: 8799

Troubleshooting Lebara MMS

  1. Confirm you have an active mobile data connection — MMS can't send or receive over Wi-Fi alone.
  2. Check the MMSC address carefully: it must be exactly http://mmsc.mms.vodafone.co.uk:8002.
  3. Verify the MMS Proxy and Port read 212.183.137.012 and 8799 — this is where most MMS faults come from.
  4. Make sure APN Type includes mms in addition to default and supl.
  5. On Android, tap the radio button to actually activate the APN profile, not just save it.
  6. Check your messaging app's MMS setting is switched on.
  7. Restart your phone after any changes.
  8. As a last resort, reset network settings and re-enter everything from the table above.
  9. Contact Lebara on 5588 (free from Lebara) or online chat at lebara if that still doesn't resolve it.

Frequently Asked Questions — Lebara MMS

What is the Lebara MMSC address?
The Lebara MMSC address is http://mmsc.mms.vodafone.co.uk:8002.MMS Proxy: 212.183.137.012, Port: 8799. Enter these values exactly in your APN settings to enable picture messaging.
Why are Lebara picture messages not working?
The most common causes are: mobile data is disabled, the MMSC is entered incorrectly, or the APN Type does not include mms. Verify the values from the table above exactly. Also confirm the APN profile is selected (filled radio button on Android).
What APN type should I use for Lebara MMS?
Use APN Type: default,supl,mms. This combines internet data, SUPL (GPS), and MMS in a single APN entry. All three values are required for full functionality.
Does Lebara MMS work on 5G?
Yes. MMS works on all Lebara network connections — 2G, 3G, 4G and 5G — using the same MMSC settings. The connection type does not affect MMS sending or receiving.
Why is MMS greyed out on my iPhone with Lebara?
On iPhones, the MMS APN is controlled by the carrier bundle — you cannot edit it manually. Go to Settings › General › About to check for a carrier settings update. If MMS is still not working, contact Lebara support: 5588 (free from Lebara) or online chat at lebara.co.uk.

← Back to Lebara APN Settings